Chrysler Jeep Crossfire MOT Check

MOT pass rates, common failures, and reliability data for the Chrysler Jeep Crossfire. Check any Crossfire by registration number below.

Free, instant, no sign-up required.

76.4%

Avg Pass Rate

+8.1%

vs Chrysler Jeep Avg

Year Ranges

Good

Reliability

Chrysler Jeep Crossfire — MOT Reliability Overview

The Chrysler Jeep Crossfire has an average MOT pass rate of 76.4%, which is 8.1 percentage points above the Chrysler Jeep brand average of 68.3%. This is a reasonable result that reflects typical UK reliability standards. Regular servicing and addressing advisories promptly will help keep your Crossfire on the road.

The most common reasons a Chrysler Jeep Crossfire fails its MOT are a spring or spring component fractured or seriously weakened, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. If you are preparing your Crossfire for its MOT, checking these areas first could save you a retest fee. Our detailed fault analysis includes estimated repair costs for each failure type.

Before buying a used Chrysler Jeep Crossfire, we recommend checking the full MOT history, write-off status, outstanding finance, and stolen vehicle status. These checks can be done for free using the registration number.

MOT Pass Rate by Year

How the Chrysler Jeep Crossfire performs at MOT across different model years.

2007

Based on 108 vehicles

85.2%Excellent

Chrysler Jeep average: 68.3%

Dangerous Defects

0.0%

Retest Rate

7.9%

2006

Based on 210 vehicles

75.2%Good

Chrysler Jeep average: 68.3%

Dangerous Defects

4.1%

Retest Rate

16.3%

2005

Based on 270 vehicles

78.9%Good

Chrysler Jeep average: 68.3%

Dangerous Defects

5.6%

Retest Rate

16.3%

2004

Based on 266 vehicles

71.4%Average

Chrysler Jeep average: 68.3%

Dangerous Defects

2.0%

Retest Rate

13.8%

2003

Based on 83 vehicles

71.1%Average

Chrysler Jeep average: 68.3%

Dangerous Defects

6.5%

Retest Rate

52.2%

Top MOT Failures — Chrysler Jeep Crossfire

The most common reasons a Chrysler Jeep Crossfire fails its MOT, aggregated across all year ranges.

A spring or spring component fractured or seriously weakened

5.3%

The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired

4.1%

Chrysler Jeep Crossfire Common Faults & Repair Costs

Where Failures Occur

The areas of the vehicle most commonly flagged during MOT inspections.

Front Nearside

1.9%

Front Offside

1.9%

Rear Offside

0.9%

Other Chrysler Jeep Models

Compare MOT reliability across Chrysler Jeep models.

Chrysler Jeep Wrangler

71.2% pass rate

Chrysler Jeep Grand Voyager

65.1% pass rate

Chrysler Jeep Pt Cruiser

67.7% pass rate

Chrysler Jeep 300

70.6% pass rate

Chrysler Jeep Grand Cherokee

75.3% pass rate

Chrysler Jeep Compass

57.3% pass rate

Useful MOT Guides

Common MOT Failures

The most common reasons UK vehicles fail their MOT — and how to prepare.

MOT Checklist

Pre-MOT checklist to improve your chances of passing first time.

Advisory vs Failure

Understanding the difference between MOT advisories and failures.

See detailed fault analysis for Chrysler Jeep Crossfire

Chrysler Jeep Crossfire — Frequently Asked Questions

Common questions about the Chrysler Jeep Crossfire MOT and reliability.

What is the MOT pass rate for the Chrysler Jeep Crossfire?

The average MOT pass rate for the Chrysler Jeep Crossfire is 76.4% compared to the Chrysler Jeep average of 68.3%. Pass rates vary by year — check the year-by-year breakdown on this page for details.

What are the most common MOT failures on a Chrysler Jeep Crossfire?

The most common MOT failures on the Chrysler Jeep Crossfire are: A spring or spring component fractured or seriously weakened (5.3%), The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired (4.1%). These are the components most likely to cause an MOT failure.

Is the Chrysler Jeep Crossfire reliable?

With an average MOT pass rate of 76.4%, the Chrysler Jeep Crossfire is rated as "Good" for reliability. This is a strong result suggesting good build quality and fewer common defects.

How do I check the MOT history of a Chrysler Jeep Crossfire?

Enter the vehicle's registration number in the search box at the top of this page. You will instantly see the complete MOT history including every test result, mileage readings, advisories, and dangerous defects — completely free.

What mileage should I expect on a Chrysler Jeep Crossfire?

Mileage data for the Chrysler Jeep Crossfire is available in the detailed breakdown on this page.

Check Your Chrysler Jeep Crossfire's MOT History

Enter the registration number for the full MOT history — free and instant.